mywifiext.local

Access router configuration page

Guide for mywifiext.local
Wireless Extender

Setup with mywifiext.local

If you have WiFi routers in your homes, then you must know about the problems of the dead zones. To curb this problem, extenders play an important role. With this, you can extend the range of your WiFi signal to the dead zones. But, in order to do this, there is a need to complete the setup with mywifiext. local or mywifiext.net. The guide to sign in into the mywifiext.local is explained in detail so that you can easily set up your Extender.

Guide to mywifiext.local Login

The manual method and WPS method are the two possible methods for the mywifiext.local login. WPS is not supported with every router. Therefore, you need to follow the manual method as an alternative. Both the methods are explained one by one to make your work easy. You can find the steps for the method suitable to you!

mywifiext

Manual Method

Don’t get confused with the word MANUAL. The web browser method is basically considered as the manual method. Find the instructions below for the Manual Method.

  • Step 1: Connect the Extender to the power source.
  • Step 2: Turn on the Extender.
  • Step 3: Now, connect the system and Extender.
  • Step 4: Open the list of available network devices, and click on the name Net_ext SSID.
  • Step 5: Launch the web browser as per your choice.
  • Step 6: In the URL field, type mywifiext.local in the field and tap Enter.
  • Step 7: Create your account if you are a first-time user otherwise enter the login details.
  • Step 8: Select the name of the existing WiFi network to extend.
  • Step 9: Click on Next and then on the Finish button.
  • Step 10: Now, unplug your extender and connect it near the dead zone.
  • Step 11: Try to connect any device with the extender network for confirmation of successful setup.

You are connected! Great. With this, your Extender Setup is complete. You can now complete your work in the areas where it was not possible before. Now, we will have a look at another method i.e. WPS. It is possible only if your routers have a WPS button, otherwise, you need to follow the above method only.

wps-method

WPS Method

  • Step 1: Connect the extender to the power supply, and turn it on.
  • Step 2: Press and hold the WPS button for Extender for a few seconds.
  • Step 3: Now, press and hold the WPS button on your existing router for some time.
  • Step 4: The connectivity indicator light will turn into solid green color after the successful connection with the extender.
  • Step 5: In case, you are using the dual-band routers, then follow the above-mentioned steps again.
  • Step 6: Next, connect with the extender’s network by using the password of the existing network.
  • Step 7: In case, the existing credentials don’t work, then search for default credentials on the Extender.
  • Step 8: Now, unplug the extender, and connect it to your desired location.
  • Step 9: Connect the devices with the Extender network with the name Net_ext SSID.
  • Step 10: With a successful internet connection, your setup is complete for extender using WPS.

Therefore, these two methods will help you in creating a seamless internet connectivity region in a few minutes. You will be able to access the network from any point in your home or office. There are instances that during the setup with the manual method, you have connected your system to the Extender with the help of an ethernet cable. But it is not necessary. You can do it without an Ethernet Port as well. Find the steps for the Extender Setup without Ethernet Port in the next section.

Extender Setup Without Ethernet Port

Most of the Extenders don’t have the Ethernet Port, therefore, there is a need to do the setup with the wireless connection. To do so, you need to follow the steps given below:

  • 1:At first, make sure your both the devices i.e. repeater and router, should be in the same room during the setup or at a distance of around 5-10 feet.
  • 2: Connect the Extender with the device using a WiFi connection.
  • 3: Now, go to the web browser of your choice.
  • 4: Enter the address mywifiext.local or mywifiext.net in the URL field.
  • 5: Now, the login page will open. Enter the default credentials.
  • 6: The installation wizard will open.
  • 7: Follow the on-screen instructions, and click on the Finish button.
  • 8: Now unplug the Extender, and place it at the desired place.
  • 9: Try to connect the WiFi device with the extender for confirmation of successful setup.
 Extender Setup

Seamless Connectivity!

Everybody wants to experience seamless internet connectivity at all places. Your wish can come true with the help of Extenders. By setting up the Extenders with the help of mywifiext.net or mywifiext.local, you can experience uninterrupted internet connectivity at any point in your building.